In the daily operation of mold processing, we should pay special attention to the possibility that some small details will lead to safety problems. When working in the machining center, we should pay attention to safety. The CNC machining center is a common equipment in mold processing. This equipment has a high level of automation, and the general programming stops control, so the structure is relatively complex. We should pay special attention in the process of application, once damaged, it will bring loss to the enterprise. Jinan mold small edition to share with you what should be paid attention to in the daily processing of mold.
First of all, in the mold processing, try to ensure that the process preparation is concise, the expression content is detailed, and the numerical expression is as much as possible; if there are key and difficult points in the processing, special emphasis should be placed, and when meeting the center of the demand combination processing, it must be clearly expressed.
Secondly, if the inlay needs to be processed separately, it should pay attention to the process requirements of processing accuracy. After combined processing, the inlay parts need to be processed separately.
In addition, the spring in the mold processing is easy to be damaged, so we should choose the mold spring with long service life and high quality. When the mold cavity of Jinan die is milled, the filing allowance should be properly controlled according to the surface roughness. For the parts with difficult milling, if the surface roughness is poor, more filing allowance shall be properly reserved; for the parts with easy machining such as plane and right angle groove, the surface roughness value shall be reduced as far as possible, the filing workload shall be reduced, and the accuracy of cavity surface shall be prevented from being affected due to large area filing. In milling curved surface parts, if it is found that the heat treatment of part data is not good, there are cracks, uneven structure and other phenomena, the processing should be stopped in time to prevent wasting time and reduce unnecessary losses.
In order to ensure the quality and accuracy of the products, Jinan mould should stop strictly according to the operation instructions, stop the inspection of the equipment before use, dispose the unqualified products in time and other measures can reduce the loss of the enterprise and extend the service life of the equipment. In addition to the mold itself, it also requires mold base, mold base, mold core to cause parts to be ejected and installed. These parts are generally made into universal type.
In the field of increasing technology, we should consider our own factors including technology, capital, equipment and other conditions according to the market demand, affirm the product and market positioning, and focus on the development and implementation of our own technical and product advantages. In addition, we can also create more foreign technologies. Novel and good technologies can not only provide us with assistance, but also help us understand the market trend, so as to facilitate the better development of enterprises
The above is about the mold processing should pay attention to, want to know more welcome to consult http://www.436695.tw Website.